Hello Family Solus..
After some lots of problems (projector with bad lamp etc...)here some of my first print before finishing and casting in silver..My rings are the most of the time heavy so need to adjust my supports and i put all the time text inside....I'm very happy with Solus..Thanks Jordi and the team for their supports..
Ironfonzy's Prints
Re: Ironfonzy's Prints
those are heavy rings , make sure to anneal before you cast , dont just UV them
Re: Ironfonzy's Prints
Thanks ...what to you mean by anneal?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Ironfonzy's Prints
Heat treat. Low temperature oven (150f) for about 1-2 hours.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- JesseTaylor
- Novice
- Posts:24
- Joined:Wed Apr 27, 2016 1:51 am
Re: Ironfonzy's Prints
Nice chunky designs...very cool
-
- Novice
- Posts:96
- Joined:Mon Mar 28, 2016 8:05 am
Re: Ironfonzy's Prints
Awesome prints Arnaud
Who is online
Users browsing this forum: No registered users and 4 guests