Please introduce yourselves
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
My dog, Dakota is also an employee. He goes to work with me everyday. He's the Security personal. And yes, he has issued warnings to a few guys to leave. Were casing my store.
- toddmichael
- Novice
- Posts:77
- Joined:Sun Jul 05, 2015 4:33 am
- Location:Motor City, Mi
Re: Please introduce yourselves
Toddmichael, native Michigander, hold up your Michigan map, I am from your middle finger finger nail, and now live near the bottom crease of the thumb. Poor Michigan humor I know, but its true. Been in the jewelry business as a bench goldsmith designer since day one. Just closed my store of 23 years, been working for someone else and chomping at the bit most days to be my own boss again. Want to reopen some cleaner version of before. Jack of all trades, but got into 3d, milling and printing in the least 6 years and really enjoy it. Moderate a milling forum, and taking to 3d printing as fast as I can soak it up. Own 3 printers, but solus is the best resin printer I own. Even have access to a super expensive machine from Envisiontec, and Solus is right there running neck n neck with resolution quality.
Toddmichael
Firestorm Cad / Jeweler / Designer
Firestorm Cad / Jeweler / Designer
Re: Please introduce yourselves
David Wages Texas City TX
I am self employed bench jeweler, I work as an independent contractor for a jewelry store in TX City TX. I have been a bench jeweler for over 40 years and in CAD for about 5. I love doing CAD work and really enjoying the Solus printer. I work in RG 5.5. I look forward to learning and sharing about 3d printing!
I am self employed bench jeweler, I work as an independent contractor for a jewelry store in TX City TX. I have been a bench jeweler for over 40 years and in CAD for about 5. I love doing CAD work and really enjoying the Solus printer. I work in RG 5.5. I look forward to learning and sharing about 3d printing!
Re: Please introduce yourselves
Hi, My name is Henry from Texas. I do CAD and milling over 11 years. This is my first time to learn DLP printer and very happy with Solus printer too. Hope I can learn more things here.. Thanks advance!
Best regards
Henry
Best regards
Henry
Re: Please introduce yourselves
Gary Ramsey, Red Bluff, CA. I've been a Bench Jeweler/manufacturer for over 40 years. I own my own store, Gary Ramsey Jewelers ( garyramseyjewelers.com ). 9 years cad/cam, Matrix, Rhino, Revo B Mill and B9 Creator.
- Bitter Jeweler
- Posts:8
- Joined:Mon Oct 12, 2015 9:39 pm
Re: Please introduce yourselves
So many familiar "faces" here!
Been a jeweler for over 25 years. One man show for the last 6 years.
Ordered the Solus last week. Looking forward to working with it soon.
I have a mill, and the B9 Creator was my first frustrating experience into 3d printing/growing.
I have and love my Solidscape 3Z Studio printer. After 2 years of overall success with it, I had my first week of it being down.
Which prompted me to get something as a backup, and for samples the customer can finger.
My Solidscape issue was just a bad ribbon cable, but it took them far too long to diagnose, effectively shutting me down.
Hopefully the Solus will be a better resin experience than the B9 V1.1. I never got it performing adequately, and hated dealing with the PDMS.
That lead me to getting the Solidscape.
I've waited for a non-PDMS solution, and the Solus prints I have seen look fantastic. I also appreciate the small footprint, and sleek design of the Solus.
I can't wait to get going and look forward to the new resins being developed!
David of David Wilkinson Design
Been a jeweler for over 25 years. One man show for the last 6 years.
Ordered the Solus last week. Looking forward to working with it soon.
I have a mill, and the B9 Creator was my first frustrating experience into 3d printing/growing.
I have and love my Solidscape 3Z Studio printer. After 2 years of overall success with it, I had my first week of it being down.
Which prompted me to get something as a backup, and for samples the customer can finger.
My Solidscape issue was just a bad ribbon cable, but it took them far too long to diagnose, effectively shutting me down.
Hopefully the Solus will be a better resin experience than the B9 V1.1. I never got it performing adequately, and hated dealing with the PDMS.
That lead me to getting the Solidscape.
I've waited for a non-PDMS solution, and the Solus prints I have seen look fantastic. I also appreciate the small footprint, and sleek design of the Solus.
I can't wait to get going and look forward to the new resins being developed!
David of David Wilkinson Design
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Please introduce yourselves
Welcome David. We hope you love your Solus!
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Please introduce yourselves
Hi,
Just ordered my Solus too, looking forward to its arrival!
I'm a jewellery manufacturer based in Wellington, NZ, with 25+ years in and around the trade. About 5 years ago i started CAD modelling, with Matrix.
Just ordered my Solus too, looking forward to its arrival!
I'm a jewellery manufacturer based in Wellington, NZ, with 25+ years in and around the trade. About 5 years ago i started CAD modelling, with Matrix.
Re: Please introduce yourselves
Hello Everyone! My name is Robert O'Dell and I'm glad to join this forum. I've been a jewelry designer/model-maker for 30 years hand carving and cad/cam (Revo/Matrix) but I'm new to 3D printing. I've had the Solus for several months now, learning the ins and outs of printing and I'm amazed at the ease of use and results I'm getting. No mo PDMS. Fantastic machine, thanks Mark for making a great product and thanks Emil for getting me started and helping me through the learning curve.
Nice to meet you all,
Robert
Nice to meet you all,
Robert
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Please introduce yourselves
Welcome to the forum Robert!
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 77 guests