Solus Wax Resin

Discuss 3d printing resins
User avatar
Jewelermdt
Solus Master
Posts:809
Joined:Sun Jul 19, 2015 10:38 pm
Location:N.W. Florida
Contact:
Re: Solus Wax Resin

Postby Jewelermdt » Wed Aug 01, 2018 3:25 am

If you leave the resin in the vat on your printer, then get a piece of cardboard or something cut to size to cover it up. Do this only if you plan on printing next day or two. Any longer pour it out into a separate container. Don't know about the newer SWax, but the first batch I would have cured resin in the cap of bottle. It doesn't take much light and air to cure it.
St0rmykev
Novice
Posts:35
Joined:Wed Jan 27, 2016 7:42 pm

Re: Solus Wax Resin

Postby St0rmykev » Wed Aug 01, 2018 3:11 pm

Since it was asked in a previous post, I thought I would share our first platinum cast with the Soluswax. Came out just fine. Wasn't expecting any issues since our Gold castings with the material have been just fine. For investment we used the R&R Plasticast PT. I also attached a picture of the burnout we used in case any one wanted that info.
Attachments
20180801_104757.jpg
20180801_104742.jpg
20180801_104807.jpg
20180801_104837.jpg
IMG_20180801_110155252.jpg
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Solus Wax Resin

Postby mongerdesigns » Wed Aug 01, 2018 4:09 pm

That looks great. :)
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
rsaldivar
Solus Master
Posts:327
Joined:Tue Jun 30, 2015 8:51 pm

Re: Solus Wax Resin

Postby rsaldivar » Wed Aug 01, 2018 5:45 pm

rsaldivar
Solus Master
Posts:327
Joined:Tue Jun 30, 2015 8:51 pm

Re: Solus Wax Resin

Postby rsaldivar » Wed Aug 01, 2018 5:57 pm

again
Attachments
20180731_200925.jpg
20180731_200844.jpg
20180731_200822.jpg
20180731_200720.jpg
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Solus Wax Resin

Postby mongerdesigns » Wed Aug 01, 2018 6:41 pm

Looking great, Roger. Any castings?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
rsaldivar
Solus Master
Posts:327
Joined:Tue Jun 30, 2015 8:51 pm

Re: Solus Wax Resin

Postby rsaldivar » Wed Aug 01, 2018 9:31 pm

maybe Fri,
is that how the lattus supp to be ?
what can I do about that line mid way for next time ?
Alexpolo
Novice
Posts:14
Joined:Sun Nov 22, 2015 9:21 am

Re: Solus Wax Resin

Postby Alexpolo » Wed Aug 01, 2018 10:05 pm

I cant get Lattice to work - I have some trouble with prints adhering to table. Import models - goto manual supports and on SOLUSWAX resin profile.

Any advice

thanks

Capture.JPG
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Solus Wax Resin

Postby mongerdesigns » Wed Aug 01, 2018 10:46 pm

rsaldivar wrote:maybe Fri,
is that how the lattus supp to be ?
what can I do about that line mid way for next time ?


Yes, that's how the lattice is. Not sure about the line, but it's possible the printer got bumped?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Solus Wax Resin

Postby mongerdesigns » Wed Aug 01, 2018 10:47 pm

You're looking from the bottom view. We hide it from view when you look from that angle. Look from the top or normal view.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/

Who is online

Users browsing this forum: No registered users and 3 guests