Solus Wax Resin
Cool I will cut it back to 1500 flashes. That's great it will only take about 3 minuets.
Re: Solus Wax Resin
Can a resin be ordered in Europe?
Re: Solus Wax Resin
Can somebody send me the resin profile for this new material? My Solus is offline and I'm unable to find it in the forum.
Thanks!!
Chris
Thanks!!
Chris
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Solus Wax Resin
You will need to update to the latest beta in order to use the profile. If you update, you will automagically have the profile in there.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Solus Wax Resin
Yep. Got it! Only took me about 3 hours to get my offline PC onto our company wifi. LOL.
Working now!!
Those loooong burn ins are crazy! This material must be loaded with wax. I might have to do the "lighter test". Clean it, cure it, burn it with a lighter. If it liquifies, MONEY. If it smokes, burns, and smoulders, go on break.
Working now!!
Those loooong burn ins are crazy! This material must be loaded with wax. I might have to do the "lighter test". Clean it, cure it, burn it with a lighter. If it liquifies, MONEY. If it smokes, burns, and smoulders, go on break.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Solus Wax Resin
It's not the melting kind of wax lol
It will most likely delaminate and burn.
It will most likely delaminate and burn.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- M-Williams
- Solus Master
- Posts:393
- Joined:Sun Nov 01, 2015 4:45 pm
Re: Solus Wax Resin
Did guys try to cast with Satin investment?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Solus Wax Resin
Why would you do that if Satincast is a discontinued product.
I suggest using Plasticast or Optoma Presige.
I suggest using Plasticast or Optoma Presige.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Solus Wax Resin
This stuff is challenging to print with. This is as far as my parts get. After the first couple of initial layers, nothing.
I just changed the film and restarted the job btw. So hopefully I get some parts out of this.
I just changed the film and restarted the job btw. So hopefully I get some parts out of this.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Solus Wax Resin
Do you have lots of hours on your projector bulb?
That's usually a clue if the initial layers print and then nothing.
Either replace the bulb, or try increasing the exposure times until you get a print.
That's usually a clue if the initial layers print and then nothing.
Either replace the bulb, or try increasing the exposure times until you get a print.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 4 guests