Page 3 of 19

Re: Solus Wax Resin

Posted: Thu May 17, 2018 1:24 am
by printcast
Let us know. I hope you are planning to take pics.

Re: Solus Wax Resin

Posted: Thu May 17, 2018 3:54 am
by Jewelermdt
I have so busy and backed up with casting I haven't had time to take pictures. I do my casting at home. I set up my flasks around 7pm. In oven at 11 with 1 hour delay. Cast at 7am. Shower and off to work. But so far the Solus Wax has been casting great.
this is a finished ring. Got lots of fill in on shank with the Blue Solus Cast. Not so with SolusWax.
button2.jpg

Re: Solus Wax Resin

Posted: Mon Jun 04, 2018 8:55 pm
by ironfonzy
Some news of the soluswax resin ???? ;)

Re: Solus Wax Resin

Posted: Tue Jun 05, 2018 2:15 am
by Jewelermdt
Might have to wait till the JCK Vegas show is over.

I've been getting great prints with it. Casting has been up and down. Some voids and such but been able to fix using my laser.

Re: Solus Wax Resin

Posted: Tue Jun 05, 2018 3:45 am
by lklutts
I have been having great success with the solus wax. Cure 30 minutes 5 hour rest after investing. Straight up full power to 1450 for 2.5 hours,then down to 850 to cast. No porosity,just fantastic castings.

Re: Solus Wax Resin

Posted: Tue Jun 05, 2018 7:40 pm
by M-Williams
lklutts wrote:I have been having great success with the solus wax. Cure 30 minutes 5 hour rest after investing. Straight up full power to 1450 for 2.5 hours,then down to 850 to cast. No porosity,just fantastic castings.



That sounds promising. How is the print Quality?

Re: Solus Wax Resin

Posted: Tue Jun 05, 2018 9:26 pm
by lklutts
The blue on the right is the latest that I was testing. On the left is the first one. Resolution is much better on the blue at 42. Prints great, casts great. another pic of a filigree in white gold. Came out great.

Re: Solus Wax Resin

Posted: Tue Jun 05, 2018 10:57 pm
by mongerdesigns
Excellent work Len. That casting looks legit!

Re: Solus Wax Resin

Posted: Tue Jun 05, 2018 11:01 pm
by rsaldivar
im curious to see the casting on the ring with fonts , nice work Len

Re: Solus Wax Resin

Posted: Wed Jun 06, 2018 1:28 am
by exedebee
:o :o very nice