Page 7 of 8

Re: ResinWorks EasyCastHD castable resin

Posted: Mon Apr 29, 2019 4:40 am
by rcdesign
So far I like how well this resin prints and casts. This one takes a while to print- 7+ hrs@30Z but it's fun to look at.

Re: ResinWorks EasyCastHD castable resin

Posted: Sun Jun 09, 2019 11:56 pm
by hasd81
Does anyone know the specific gravity of this resin?

Re: ResinWorks EasyCastHD castable resin

Posted: Mon Jun 10, 2019 7:18 am
by Kokos
Print 1cm^3 cube and weigh it. Then you have the specific gravity.

EDIT: Just got a new bottle. And in the MSDS it says on page 2: specific gravity 1.1g/cm^3 @25Celcius. But that might be as a liquid, maybe solid it changes slightly idk.

Re: ResinWorks EasyCastHD castable resin

Posted: Tue Jul 02, 2019 4:05 am
by JesseTaylor
Everyone is raving about this material but I have had mixed results. Some very nice prints and some horrible failures with lots of little cured flakes and unbuilt supports. I am building at 25XY-30Z as I always have. Don't feel confident to commit to 1kg of this material at this stage.

Re: ResinWorks EasyCastHD castable resin

Posted: Tue Jul 02, 2019 10:33 pm
by mongerdesigns
Try printing at 42xy 30z.

Re: ResinWorks EasyCastHD castable resin

Posted: Thu Jul 04, 2019 1:03 am
by JesseTaylor
Making the switch to 42XY-30Z. I have always wanted to print bigger and I will order some EasyCastHD today.

Re: ResinWorks EasyCastHD castable resin

Posted: Tue Jul 09, 2019 2:48 am
by JesseTaylor
Now printing with EasyCastHD at 42XY and super impressed with the detail and quality of the results. Have ordered a UV chamber for curing so should be full steam ahead.

Re: ResinWorks EasyCastHD castable resin

Posted: Tue Jul 09, 2019 3:42 am
by mongerdesigns
Don’t forget the glycerin. Best to cure it submerged in glycerin under uv. Makes all the difference for casting.

Re: ResinWorks EasyCastHD castable resin

Posted: Fri Aug 16, 2019 12:01 am
by JesseTaylor
Just about done with EasyCastHD. Three prints, same data, two materials, one success. Everytime I have a print failure it is disrupting my work flow. To me emerald resin is still the gold standard and better than the brown.

Re: ResinWorks EasyCastHD castable resin

Posted: Fri Aug 16, 2019 2:18 am
by Jewelermdt
I've been getting great results with the SolusCast.