Hi,
I'd like to print some functional accessories for my fountain pens and other frequently used items and was wondering which resin would be best for such tasks.
1- Which shrinks less?
2- Which is more brittle?
3- Is it possible to make a mold of the SolusArt if used for jewelry prototyping as well?
Thanks,
Rob
SolusProto vs SolusArt for Functional Accessories
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: SolusProto vs SolusArt for Functional Accessories
SolusProto for functional or geometric prints. It harder and has more flex, therefore not brittle. It’s also more dense.
SolusArt for figurines, and highly detailed prints. It’s matte and sharper. It’s lighter, and slightly more brittle.
Both can be molded.
SolusArt for figurines, and highly detailed prints. It’s matte and sharper. It’s lighter, and slightly more brittle.
Both can be molded.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: SolusProto vs SolusArt for Functional Accessories
Hey Emil,
They both sound they could work for me but any idea which shrinks less? I don't want to deal with scaling the prints if possible.
Thanks,
Rob
They both sound they could work for me but any idea which shrinks less? I don't want to deal with scaling the prints if possible.
Thanks,
Rob
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: SolusProto vs SolusArt for Functional Accessories
I believe SolusArt Grey shrinks less.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: SolusProto vs SolusArt for Functional Accessories
which one of these two resins print faster? Or are they the same
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: SolusProto vs SolusArt for Functional Accessories
SolusPro is faster
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 1 guest