how many people use the B9 resins on the solus ?

Discuss 3d printing resins
User avatar
mongerdesigns
Solus Guru
Posts: 1904
Joined: Sat Apr 25, 2015 5:16 pm
Location: Los Angeles
Contact:

Re: how many people use the B9 resins on the solus ?

Postby mongerdesigns » Fri Aug 16, 2019 11:28 pm

1 hour in glycerin under uv lights.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
sochin
Novice
Posts: 43
Joined: Sat Feb 10, 2018 12:12 am

Re: how many people use the B9 resins on the solus ?

Postby sochin » Mon Aug 19, 2019 12:18 pm

mongerdesigns wrote:The new EasyCastHDo2 Green is even better for casting. I suggest getting a sample bottle and trying it. http://www.junction3d.com/buy/ccw-easycast-hd-m3tfy



Might have to try something different soon. Still casting B9 Cherry but no one stocks it in Oz anymore. Could never see much of a difference between the B9 Green and Cherry. Prefer working in the Cherry.

LOL.....too many to look at now. How things have changed.
rsaldivar
Solus Expert
Posts: 293
Joined: Tue Jun 30, 2015 8:51 pm

Re: how many people use the B9 resins on the solus ?

Postby rsaldivar » Tue Aug 27, 2019 12:22 am

so how do I get the new green to print as sharp as the brown did ? all the holes (cut outs ) made for the stones are covered with the prongs of the next stone on top , they blend , what way do I move my settings to compensate , or is this just the way it prints ??
Attachments
20190826_175823.jpg
20190826_181246.jpg
20190826_181028.jpg
20190826_181430.jpg
20190826_175759.jpg
rsaldivar
Solus Expert
Posts: 293
Joined: Tue Jun 30, 2015 8:51 pm

Re: how many people use the B9 resins on the solus ?

Postby rsaldivar » Tue Aug 27, 2019 12:26 am

where do I get the glycerin and do I add anything to it ? straight 100 % ? for how long ?
User avatar
Jewelermdt
Solus Master
Posts: 773
Joined: Sun Jul 19, 2015 10:38 pm
Location: N.W. Florida
Contact:

Re: how many people use the B9 resins on the solus ?

Postby Jewelermdt » Tue Aug 27, 2019 12:32 am

Try your local drug store.
From what I have read on other post, about an hour in straight glycerin.
User avatar
Messerbr
Solus Expert
Posts: 158
Joined: Tue Jan 05, 2016 2:54 pm
Location: North Carolina
Contact:

Re: how many people use the B9 resins on the solus ?

Postby Messerbr » Tue Aug 27, 2019 1:26 pm

rsaldivar wrote:where do I get the glycerin and do I add anything to it ? straight 100 % ? for how long ?


This is the glycerin I ordered. I let mine sit for at least an hour, but sometimes I put it in in the mornings and dont take it out until 3pm when I set up to invest for the next morning. The parts do like to float to the top so every now and then I'll go and move them down.
https://www.amazon.com/gp/product/B01N4B288A/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
User avatar
mongerdesigns
Solus Guru
Posts: 1904
Joined: Sat Apr 25, 2015 5:16 pm
Location: Los Angeles
Contact:

Re: how many people use the B9 resins on the solus ?

Postby mongerdesigns » Tue Aug 27, 2019 4:21 pm

rsaldivar wrote:so how do I get the new green to print as sharp as the brown did ? all the holes (cut outs ) made for the stones are covered with the prongs of the next stone on top , they blend , what way do I move my settings to compensate , or is this just the way it prints ??


Make sure you're using the correct profile. If you are, then lower the exposure time slightly or the intensity slider by one notch.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
rsaldivar
Solus Expert
Posts: 293
Joined: Tue Jun 30, 2015 8:51 pm

Re: how many people use the B9 resins on the solus ?

Postby rsaldivar » Tue Aug 27, 2019 7:01 pm

is lowing the exposure time slightly down about .6 of what it is now ? , and your saying only one bar to the left on the intensity slider ??
User avatar
mongerdesigns
Solus Guru
Posts: 1904
Joined: Sat Apr 25, 2015 5:16 pm
Location: Los Angeles
Contact:

Re: how many people use the B9 resins on the solus ?

Postby mongerdesigns » Tue Aug 27, 2019 7:58 pm

Lower it by 0.5s to start and yes move the slider to the left by 1 notch.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
Archerm
Solus Master
Posts: 581
Joined: Mon Oct 26, 2015 1:57 pm
Location: North Carolina

Re: how many people use the B9 resins on the solus ?

Postby Archerm » Wed Aug 28, 2019 3:55 am

I have been using the green from the beginning. I am using the original profile that is in the software program. Never had any issues. Might want to recalibrate your build plate.. are your rings out of round any?
I printed these Friday on my 42xy machine.
Image

Who is online

Users browsing this forum: No registered users and 3 guests