I found this article today on 3ders
http://www.3ders.org/articles/20160202- ... nters.html
I'm very curious to test it to fabricate mechanical structure.
Sebastien
ceramic
-
- Novice
- Posts:50
- Joined:Mon Jan 25, 2016 8:01 am
Re: ceramic
I saw that too but I'm not sure it can handle the resolution Solus prints at. Maybe just adding some extra pigment will do the trick.
-
- Novice
- Posts:50
- Joined:Mon Jan 25, 2016 8:01 am
Re: ceramic
I will try a bottle
Re: ceramic
Thats pretty cool!! $200 will get you a bottle once it is financed.
Porcelite has been tested in wavelengths between 350 and 410 nanometers.
Porcelite has been tested in wavelengths between 350 and 410 nanometers.
Re: ceramic
Any more info on this? I emailed the producer but have received no reply yet.
-
- Novice
- Posts:50
- Joined:Mon Jan 25, 2016 8:01 am
Re: ceramic
In principle they shall deliver the resin in April. I guess they are quite busy these days...
Re: ceramic
Thanks Sebastion. They finally did get back to me but only repeated the wavelength info mentioned above. You can now purchase the resin on their website, but there is no indication of whether it is for immediate shipment.
-
- Novice
- Posts:50
- Joined:Mon Jan 25, 2016 8:01 am
Re: ceramic
I get the bottle this morning... Time to find the right parameters.
I had some failed prints but seems to be compatible with the solus.
I had some failed prints but seems to be compatible with the solus.
Re: ceramic
Cool! Please keep us posted.
-
- Novice
- Posts:50
- Joined:Mon Jan 25, 2016 8:01 am
Re: ceramic
I was able to get a printed piece today and I can say that the reain is compatible withe solus.
Will try to post a picture soon.
Will try to post a picture soon.
Who is online
Users browsing this forum: No registered users and 151 guests