Help with slicing profile for new Maker Juice resin

Discuss 3d printing resins
User avatar
Haresear
Posts:5
Joined:Mon Dec 14, 2015 11:00 pm
Location:Montana
Contact:
Help with slicing profile for new Maker Juice resin

Postby Haresear » Mon Apr 04, 2016 9:24 pm

Can anyone help with the slicing profile. I created one but the build time is way longer then it should be. This is what they had on their site -
Solus Settings
30μm Layers
Burn in: 15 seconds per layer, 10 layers
All others: 800-1200 ms per layer

honestly I don't know what I'm doing.
User avatar
Haresear
Posts:5
Joined:Mon Dec 14, 2015 11:00 pm
Location:Montana
Contact:

Re: Help with slicing profile for new Maker Juice resin

Postby Haresear » Mon Apr 04, 2016 11:07 pm

well it prints very nice! I am currently curing it under UV. I must be close to the right slicing profile. I don't know how to insert a pic here so I will put it on 3dcadjewelry
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Help with slicing profile for new Maker Juice resin

Postby mongerdesigns » Tue Apr 05, 2016 12:09 am

Waiting to get my bottle so I can test it and release a profile. Hopefully by the end of the week. Not sure what kind of shipping they used.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Help with slicing profile for new Maker Juice resin

Postby mongerdesigns » Tue Apr 05, 2016 12:10 am

Haresear wrote:well it prints very nice! I am currently curing it under UV. I must be close to the right slicing profile. I don't know how to insert a pic here so I will put it on 3dcadjewelry



To insert a photo, click on Attachements, then upload the file, then click on INLINE, then Submit.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
sgraber
Novice
Posts:15
Joined:Tue Apr 05, 2016 1:03 pm

Re: Help with slicing profile for new Maker Juice resin

Postby sgraber » Tue Apr 05, 2016 2:16 pm

Haresear wrote:Can anyone help with the slicing profile. I created one but the build time is way longer then it should be. This is what they had on their site -
Solus Settings
30μm Layers
Burn in: 15 seconds per layer, 10 layers
All others: 800-1200 ms per layer

honestly I don't know what I'm doing.


How long did it take to print and what were your settings?
Jubiler
Novice
Posts:19
Joined:Tue Oct 20, 2015 4:09 am

Re: Help with slicing profile for new Maker Juice resin

Postby Jubiler » Fri Apr 22, 2016 9:27 pm

Hello! Did you guys find out correct profile for the this reisns?

Who is online

Users browsing this forum: No registered users and 13 guests