Hybrid Resin Blend (WaxCast and Emerald)

Discuss 3d printing resins
Mhgjewel
Novice
Posts:17
Joined:Thu Jul 02, 2015 12:17 pm
Re: Hybrid Resin Blend (WaxCast and Emerald)

Postby Mhgjewel » Sat May 06, 2017 6:52 pm

Are you getting a glass finish cure all the way to the center? How long are you leaving it under those lights? In or out of water?
User avatar
M-Williams
Solus Master
Posts:393
Joined:Sun Nov 01, 2015 4:45 pm

Re: Hybrid Resin Blend (WaxCast and Emerald)

Postby M-Williams » Sun May 07, 2017 8:46 pm

Yes Im getting that glass finish you are talking about, only with the cherry resin though. However with the emerald the part becomes bone dry, hard to break , they always look as if they weren't thoroughly cleaned.
Regarding the cycle I use the b9c curing unit instructions.
User avatar
sgraber
Novice
Posts:15
Joined:Tue Apr 05, 2016 1:03 pm

Re: Hybrid Resin Blend (WaxCast and Emerald)

Postby sgraber » Mon May 08, 2017 2:58 pm

M-Williams wrote:
Mhgjewel wrote:What are you using?

http://www.ebay.com/itm/QUANS-110V-20W- ... 46587158cf The same LED's as the B9c curing unit or the envisiontec box.


How did you find out what B9 and Envisiontec are using for their cure lamps? And how long are you leaving it under them?
User avatar
M-Williams
Solus Master
Posts:393
Joined:Sun Nov 01, 2015 4:45 pm

Re: Hybrid Resin Blend (WaxCast and Emerald)

Postby M-Williams » Mon May 22, 2017 6:24 pm

That is Simple . go to their relative websites,Products, than specs.

Here you go https://www.b9c.com//media/files/Brochu ... ure-hd.pdf
User avatar
M-Williams
Solus Master
Posts:393
Joined:Sun Nov 01, 2015 4:45 pm

Re: Hybrid Resin Blend (WaxCast and Emerald)

Postby M-Williams » Thu May 24, 2018 12:27 pm

Update: We completely stopped using UV LEDs due to their limit in curing most hybrid curing, or the solucast on its own.The casting results weren't that good.

Marc.
robin
Solus Expert
Posts:144
Joined:Wed Sep 23, 2015 3:03 pm

Re: Hybrid Resin Blend (WaxCast and Emerald)

Postby robin » Fri Jun 08, 2018 11:08 pm

M-Williams wrote:Update: We completely stopped using UV LEDs due to their limit in curing most hybrid curing, or the solucast on its own.The casting results weren't that good.

Marc.

What do you use/do to fully cure them?
rsaldivar
Solus Master
Posts:327
Joined:Tue Jun 30, 2015 8:51 pm

Re: Hybrid Resin Blend (WaxCast and Emerald)

Postby rsaldivar » Sat Jun 09, 2018 4:34 pm

I like the lizard lamp because of the heat
User avatar
M-Williams
Solus Master
Posts:393
Joined:Sun Nov 01, 2015 4:45 pm

Re: Hybrid Resin Blend (WaxCast and Emerald)

Postby M-Williams » Sat Jun 09, 2018 5:46 pm

robin wrote:
M-Williams wrote:Update: We completely stopped using UV LEDs due to their limit in curing most hybrid curing, or the solucast on its own.The casting results weren't that good.

Marc.

What do you use/do to fully cure them?


They are fully cured overnight. The casting comes always perfect. By the way, we use an induction casting machine too.....Yes, the lizard lamp can be a good alternative too.
The LED's are just a wast.

Who is online

Users browsing this forum: No registered users and 8 guests