B9 Yellow 25z profile
is there a profile for 25z?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: B9 Yellow 25z profile
No. But you can just change the 0.030 to 0.025 and print. Everything else can stay the same.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: B9 Yellow 25z profile
use 3300ms for 25z?
i've been using 2700 for 25z, and it's been working well up until now. i believe due to lumen loss... at 2800ms now.
should i take it higher? 3300 seems like too much.
i've been using 2700 for 25z, and it's been working well up until now. i believe due to lumen loss... at 2800ms now.
should i take it higher? 3300 seems like too much.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: B9 Yellow 25z profile
The yellow is much better at blocking light. I tested it until a reliable cure was achieved without detail loss.
But you're welcome to try your own settings.
But you're welcome to try your own settings.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: B9 Yellow 25z profile
i hadn't seen any profile published, so i took a guess.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: B9 Yellow 25z profile
Wdshea wrote:i hadn't seen any profile published, so i took a guess.
http://www.reify-3d.com/forum/viewtopic.php?f=13&t=128
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: B9 Yellow 25z profile
Sorry, mustve missed the part about using the same settings.
I'm using 3000ms with no issue as of now.
Thanks
I'm using 3000ms with no issue as of now.
Thanks
Who is online
Users browsing this forum: No registered users and 151 guests