Fail ring print with B9 Emerald
-
- Novice
- Posts:27
- Joined:Mon Apr 25, 2016 10:29 pm
What are the settings for Emerald green. I have not been able to print a ring with out fail. I've add more support than the video and still fail. Any suggestions?
Re: Fail ring print with B9 Emerald
Hi , Can you post a image of the failed print and cad file?
-
- Novice
- Posts:27
- Joined:Mon Apr 25, 2016 10:29 pm
Re: Fail ring print with B9 Emerald
It was a bad mesh, lots of non-manifold edges. I suspect that was your problem.
It is a good idea to check all models before printing with netfabb. The basic version is free and it will save you a lot of headaches.
Here is the file after netfabb had its way with it
https://www.dropbox.com/s/g87rywc079zcjco/Kim%2075_9_19-Repaired.stl?dl=0
It is a good idea to check all models before printing with netfabb. The basic version is free and it will save you a lot of headaches.
Here is the file after netfabb had its way with it
https://www.dropbox.com/s/g87rywc079zcjco/Kim%2075_9_19-Repaired.stl?dl=0
Re: Fail ring print with B9 Emerald
I'd set it up like this. This looks like it would be the easiest way to grow it.
- Attachments
-
- Band.jpg (75.44KiB)Viewed 15862 times
-
- Novice
- Posts:27
- Joined:Mon Apr 25, 2016 10:29 pm
Re: Fail ring print with B9 Emerald
Thanks,
What are the steps when using netfabb?
What are the steps when using netfabb?
Re: Fail ring print with B9 Emerald
kghjewelry wrote:Thanks,
What are the steps when using netfabb?
Super easy:
https://www.youtube.com/watch?v=GRNriigA8R4
Re: Fail ring print with B9 Emerald
rcdesign wrote:I'd set it up like this. This looks like it would be the easiest way to grow it.
Agreed
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Fail ring print with B9 Emerald
Yup. Good suggestion.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
-
- Novice
- Posts:27
- Joined:Mon Apr 25, 2016 10:29 pm
Re: Fail ring print with B9 Emerald
I'm almost there. Most of the ring printed correctly. I tried twice. See attachment. Any suggestions,
Who is online
Users browsing this forum: No registered users and 159 guests