B9R green coming out too thick

Discuss 3d printing resins
Post Reply
jefree
Novice
Posts:17
Joined:Thu Dec 08, 2016 11:02 pm
Location:Corvallis OR
B9R green coming out too thick

Postby jefree » Tue Apr 04, 2017 11:57 pm

Can anyone explain to me why the B9R green resin is printing thicker than my designs? It's not that I don't like it but on some designs it fills in a little much...
Top
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:
Contact mongerdesigns

Re: B9R green coming out too thick

Postby mongerdesigns » Wed Apr 05, 2017 12:55 am

Make sure the bottle is mixed well. The pigment might settle on the bottom and then you will be getting overcuring. You can also decrease the exposure a bit to see if that brings back some of the details you lost.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
Top
jefree
Novice
Posts:17
Joined:Thu Dec 08, 2016 11:02 pm
Location:Corvallis OR

Re: B9R green coming out too thick

Postby jefree » Wed Apr 05, 2017 2:11 am

Okay, will do, forgot about the mixing stuff! :)
Top
Post Reply

Return to “Resins”

Who is online

Users browsing this forum: No registered users and 137 guests