and it warped and cracked...I had some successful casts but anything that wasn't very flat , cracked or warped.
any ideas?
vulcanized solus proto
-
- Solus Expert
- Posts:136
- Joined:Thu Feb 25, 2016 4:09 pm
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: vulcanized solus proto
Try rubber that has a lower temp requirement. Castaldo rubber has a required temp of about 307f.
Or try RTV molding (tin catalyzed) - Castaldo pink.
Or try RTV molding (tin catalyzed) - Castaldo pink.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 61 guests