SolusCast: Cracks in heavy model

Discuss 3d printing resins
User avatar
M-Williams
Solus Master
Posts:393
Joined:Sun Nov 01, 2015 4:45 pm
Re: SolusCast: Cracks in heavy model

Postby M-Williams » Tue May 08, 2018 8:29 pm

Here is a new print.
Attachments
IMG_0217.JPG
IMG_0218.JPG
IMG_0216.JPG
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: SolusCast: Cracks in heavy model

Postby mongerdesigns » Tue May 08, 2018 8:30 pm

Nice print, Mike. Which resin is that?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
kostyo
Novice
Posts:41
Joined:Thu Apr 27, 2017 2:14 pm

Re: SolusCast: Cracks in heavy model

Postby kostyo » Wed May 09, 2018 11:40 am

epic m.....
User avatar
M-Williams
Solus Master
Posts:393
Joined:Sun Nov 01, 2015 4:45 pm

Re: SolusCast: Cracks in heavy model

Postby M-Williams » Wed May 09, 2018 1:06 pm

Emerald, Epic. 50%
kostyo
Novice
Posts:41
Joined:Thu Apr 27, 2017 2:14 pm

Re: SolusCast: Cracks in heavy model

Postby kostyo » Wed May 09, 2018 2:19 pm

@mark why mixing emerald and epic?
now I bought a new bottle and is 100eur cheaper than last year...
User avatar
M-Williams
Solus Master
Posts:393
Joined:Sun Nov 01, 2015 4:45 pm

Re: SolusCast: Cracks in heavy model

Postby M-Williams » Wed May 09, 2018 4:09 pm

kostyo wrote:@mark why mixing emerald and epic?
now I bought a new bottle and is 100eur cheaper than last year...


Simple. the print quality is beyond any expectation . Even though the Epic casts good, but with the Emerald mix, the casting result is superior.

I will post some close-up pics.
kostyo
Novice
Posts:41
Joined:Thu Apr 27, 2017 2:14 pm

Re: SolusCast: Cracks in heavy model

Postby kostyo » Wed May 09, 2018 5:20 pm

@mark this print 25mikrons or 42?
I also thought I was trying to mix the emerald with the epic, but I am very happy as the epic cast now when I tuned postcuring.
but I'm curious about your photos
printcast
Solus Expert
Posts:157
Joined:Fri Oct 09, 2015 2:38 pm

Re: SolusCast: Cracks in heavy model

Postby printcast » Wed May 09, 2018 6:58 pm

Where can Epic be purchased?

Mix 50/50 Epic/Emerald. Are you using Emerald settings for printing? I assume the burnout for Emerald will be fine for this 50/50.


Thx
User avatar
M-Williams
Solus Master
Posts:393
Joined:Sun Nov 01, 2015 4:45 pm

Re: SolusCast: Cracks in heavy model

Postby M-Williams » Thu May 10, 2018 1:48 am

kostyo wrote:@mark this print 25mikrons or 42?
I also thought I was trying to mix the emerald with the epic, but I am very happy as the epic cast now when I tuned postcuring.
but I'm curious about your photos


25 microns All the way. The only one setting we use.
printcast
Solus Expert
Posts:157
Joined:Fri Oct 09, 2015 2:38 pm

Re: SolusCast: Cracks in heavy model

Postby printcast » Thu May 10, 2018 1:20 pm

HEY! Looks like we have a new castable resin on the way, SolusWax. The name alone sounds promising to me. Can not wait for a clean easy burnout.

Who is online

Users browsing this forum: No registered users and 12 guests