Casting with green and mj mix

[lklutts]

Not saying I have it down, but getting a grasp on it. I use the green settings for growing. I will post later my machine it's running. I have been curing in uv lamp for an hour or so.Then into my lizard lamp I got from pet mountain. 100 watt, heat,uv and ir. At the height of the box, high tech me, it goes to 150-160. I leave it till it looks cured some an hour, some three.
300 1.5
800-2
1350 3
Back to soak temp
The white gold inserts are 1mm size 11
Both came out nice.
That's my story and I am sticking to it

[eg123]

Stick to that method. It works very well.
If you have heavy rings (for example) just turn them over so it cures evenly.

Because it gets hot at the bottom I lay the model on top of a piece of glass.
Here is my set up.