My first yellow resin cast
-
- Novice
- Posts:50
- Joined:Mon Apr 25, 2016 3:49 pm
Had to build it at 41xy resolution cause it wouldn't fit on the 25xy platform.
- Attachments
-
- Capture 1.JPG (16.46KiB)Viewed 19701 times
Re: My first yellow resin cast
Looks nice and clean!!
Re: My first yellow resin cast
I've been thinking about moving to yellow from green. Yellow is suppose to be the cleanest burn out. Have you done cast with both yellow and green? How do they compare? Did you use the stock Solus yellow settings? (now that I think about it, I'm not sure if there is a stock Solus setting for yellow, lol)
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: My first yellow resin cast
There is a setting for the yellow in Contour.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
-
- Novice
- Posts:50
- Joined:Mon Apr 25, 2016 3:49 pm
Re: My first yellow resin cast
I only worked with the yellow resin so can't really compare. I had to run this in 42xy cause it wouldn't fit on the 25xy platform.
Re: My first yellow resin cast
Here's some of my B9 Yellow resin castings in 14Y..
I don't know how to embed an image from dropbox so just click it to view. figured it out!
I don't know how to embed an image from dropbox so just click it to view. figured it out!
- MobiusJewelryDesign
- Novice
- Posts:55
- Joined:Sat Sep 19, 2015 12:30 pm
- Location:Atlanta, GA
- Contact:
Re: My first yellow resin cast
That is a clean cast! What's your procedure? Setup? I use yellow too and I have used green. The green is nice to look at but I seem to get better results with the yellow. I appreciate you posting.
Re: My first yellow resin cast
Can I cure yellow in a microwave like I do with the green one? I been using emerald for a while and so far it is the best for casting using different casting companies, but I would like to try yellow. Should I be fine using same technique? clean in denatured alcohol, UV dry cure, microwave and blow dry. Thanks
Who is online
Users browsing this forum: No registered users and 63 guests