failures in printing with resin solus art

Discuss 3d printing resins
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:
Re: failures in printing with resin solus art

Postby mongerdesigns » Thu Dec 06, 2018 5:59 pm

Kenneth,

SolusArt is a new resin, so your software has to be up-to-date so you can see the profile. Download the latest beta software and restart Contour and you will see the profile.

Keep in mind that if your projector bulb is weak, you might need to adjust the Light Intensity slider to the right in order to optimize your print settings. I suggest printing a test file and adjusting slowly until you're happy with the results.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
khoover
Posts:5
Joined:Mon Dec 21, 2015 10:55 pm

Re: failures in printing with resin solus art

Postby khoover » Thu Dec 06, 2018 6:02 pm

Worked like a charm. Thanks much.

Who is online

Users browsing this forum: No registered users and 13 guests