ccw easycast resin looking for info
any links or information on the burnout, clean up ,and curing of the ccw easycast HD resin?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: ccw easycast resin looking for info
There are two manufacturer recommended burnouts:
Standard Burnout - https://www.dropbox.com/s/lxqf14lrxalos ... d.pdf?dl=0
Direct Ramp-up Burnout - https://www.dropbox.com/s/1imyxxfnm6iy7 ... p.pdf?dl=0
Standard Burnout - https://www.dropbox.com/s/lxqf14lrxalos ... d.pdf?dl=0
Direct Ramp-up Burnout - https://www.dropbox.com/s/1imyxxfnm6iy7 ... p.pdf?dl=0
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: ccw easycast resin looking for info
Do those charts really say -2°C/minute?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: ccw easycast resin looking for info
Just got the charts from ResinWorks. I'm guessing it's 2C per minute, not -2C per minute.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 157 guests