ResinWorks EasyCastHD castable resin

Discuss 3d printing resins
A.Joa1
Novice
Posts:54
Joined:Sat Dec 03, 2016 11:43 am
Re: ResinWorks EasyCastHD castable resin

Postby A.Joa1 » Sat Jan 26, 2019 6:31 am

Easycast is a good resin. Almost identical to Emerald. Maybe, maybe slightly sharper. Maybe because of the slightly less exposure time which makes it also a bit faster which is a plus.
I would switch just to support the Solus team.
Attachments
20190126_082301.jpg
Kokos
Novice
Posts:30
Joined:Sat Dec 29, 2018 10:38 am

Re: ResinWorks EasyCastHD castable resin

Postby Kokos » Sat Jan 26, 2019 6:42 pm

How is the castabilty? The prints look nice and crisp.
A.Joa1
Novice
Posts:54
Joined:Sat Dec 03, 2016 11:43 am

Re: ResinWorks EasyCastHD castable resin

Postby A.Joa1 » Sun Jan 27, 2019 7:36 am

Kokos wrote:How is the castabilty? The prints look nice and crisp.

The same as the Emerald. I will make another thread comparing the 2 when i find time.
emild
Novice
Posts:35
Joined:Wed Oct 24, 2018 9:55 pm

Re: ResinWorks EasyCastHD castable resin

Postby emild » Thu Jan 31, 2019 9:56 pm

I have a big question:

burnout chedule have a 2C per minunte. All ramp have 2 C per minute for option 2... but if you calculate will not reach the temperatures??

can anyone make clear ?

is 2C per minute for option 1 burnout or for both burnout options?

Thank you
robin
Solus Expert
Posts:144
Joined:Wed Sep 23, 2015 3:03 pm

Re: ResinWorks EasyCastHD castable resin

Postby robin » Thu Feb 21, 2019 1:32 pm

How sticky is this resin compared to B9's Emerald?
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: ResinWorks EasyCastHD castable resin

Postby mongerdesigns » Thu Feb 21, 2019 5:14 pm

Not sticky at all. It's a really good resin. I suggest printing at 42xy build area with it for best results. Haven't had a single bad print or bad casting. It's miles better than the emerald and easier to post cure. Just cure in water for 30min - 1 hour under UV. Or for better results in glycerin or water/glycerin mix. Turns into hard plastic when completely cured.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
Mikkopee
Novice
Posts:62
Joined:Mon Feb 13, 2017 1:18 pm

Re: ResinWorks EasyCastHD castable resin

Postby Mikkopee » Thu Feb 21, 2019 6:11 pm

mongerdesigns wrote:Not sticky at all. It's a really good resin. I suggest printing at 42xy build area with it for best results. Haven't had a single bad print or bad casting. It's miles better than the emerald and easier to post cure. Just cure in water for 30min - 1 hour under UV. Or for better results in glycerin or water/glycerin mix. Turns into hard plastic when completely cured.

With what investment and burncycle?
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: ResinWorks EasyCastHD castable resin

Postby mongerdesigns » Thu Feb 21, 2019 6:23 pm

That info was mentioned in this thread.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
robin
Solus Expert
Posts:144
Joined:Wed Sep 23, 2015 3:03 pm

Re: ResinWorks EasyCastHD castable resin

Postby robin » Thu Feb 21, 2019 10:25 pm

mongerdesigns wrote:Not sticky at all. It's a really good resin. I suggest printing at 42xy build area with it for best results. Haven't had a single bad print or bad casting. It's miles better than the emerald and easier to post cure. Just cure in water for 30min - 1 hour under UV. Or for better results in glycerin or water/glycerin mix. Turns into hard plastic when completely cured.


That's perfect! I'm starting to run low on my Emerald resin so I'll order an Easycast bottle next time. Thanks Emil.
rsaldivar
Solus Master
Posts:327
Joined:Tue Jun 30, 2015 8:51 pm

Re: ResinWorks EasyCastHD castable resin

Postby rsaldivar » Mon Feb 25, 2019 4:33 pm

does the brow have wax in it ?

Who is online

Users browsing this forum: Google [Bot] and 10 guests