ResinWorks EasyCastHD castable resin
So far I like how well this resin prints and casts. This one takes a while to print- 7+ hrs@30Z but it's fun to look at.
Re: ResinWorks EasyCastHD castable resin
Does anyone know the specific gravity of this resin?
Re: ResinWorks EasyCastHD castable resin
Print 1cm^3 cube and weigh it. Then you have the specific gravity.
EDIT: Just got a new bottle. And in the MSDS it says on page 2: specific gravity 1.1g/cm^3 @25Celcius. But that might be as a liquid, maybe solid it changes slightly idk.
EDIT: Just got a new bottle. And in the MSDS it says on page 2: specific gravity 1.1g/cm^3 @25Celcius. But that might be as a liquid, maybe solid it changes slightly idk.
- JesseTaylor
- Novice
- Posts:24
- Joined:Wed Apr 27, 2016 1:51 am
Re: ResinWorks EasyCastHD castable resin
Everyone is raving about this material but I have had mixed results. Some very nice prints and some horrible failures with lots of little cured flakes and unbuilt supports. I am building at 25XY-30Z as I always have. Don't feel confident to commit to 1kg of this material at this stage.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: ResinWorks EasyCastHD castable resin
Try printing at 42xy 30z.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- JesseTaylor
- Novice
- Posts:24
- Joined:Wed Apr 27, 2016 1:51 am
Re: ResinWorks EasyCastHD castable resin
Making the switch to 42XY-30Z. I have always wanted to print bigger and I will order some EasyCastHD today.
- JesseTaylor
- Novice
- Posts:24
- Joined:Wed Apr 27, 2016 1:51 am
Re: ResinWorks EasyCastHD castable resin
Now printing with EasyCastHD at 42XY and super impressed with the detail and quality of the results. Have ordered a UV chamber for curing so should be full steam ahead.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: ResinWorks EasyCastHD castable resin
Don’t forget the glycerin. Best to cure it submerged in glycerin under uv. Makes all the difference for casting.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- JesseTaylor
- Novice
- Posts:24
- Joined:Wed Apr 27, 2016 1:51 am
Re: ResinWorks EasyCastHD castable resin
Just about done with EasyCastHD. Three prints, same data, two materials, one success. Everytime I have a print failure it is disrupting my work flow. To me emerald resin is still the gold standard and better than the brown.
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: ResinWorks EasyCastHD castable resin
I've been getting great results with the SolusCast.
Who is online
Users browsing this forum: No registered users and 9 guests