EasyCast HD Print problems

Discuss 3d printing resins
joeyalbano
Novice
Posts:50
Joined:Mon Apr 25, 2016 3:49 pm
Re: EasyCast HD Print problems

Postby joeyalbano » Fri Jul 26, 2019 3:34 pm

Hi guys,

Can anybody tell me why my prints are coming out skewed? for example the coin I made are coming out oval not round, see picture please. If anybody can help, it'll be great. Thanks guys.
Attachments
ROUND DISC.jpg
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: EasyCast HD Print problems

Postby mongerdesigns » Sat Jul 27, 2019 6:12 pm

Check and make sure your grid had the correct aspect ratio.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
joeyalbano
Novice
Posts:50
Joined:Mon Apr 25, 2016 3:49 pm

Re: EasyCast HD Print problems

Postby joeyalbano » Mon Jul 29, 2019 11:47 am

Hi Monger,

I just used the default settings, should I modify it? Attached is the grid that I'm using.
Attachments
grid.jpg
joeyalbano
Novice
Posts:50
Joined:Mon Apr 25, 2016 3:49 pm

Re: EasyCast HD Print problems

Postby joeyalbano » Tue Jul 30, 2019 11:46 am

Hi Guys,

Any suggestions?
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: EasyCast HD Print problems

Postby mongerdesigns » Tue Jul 30, 2019 3:22 pm

You gotta measure it on the glass (projecting it on a paper). Make sure the width and length are correct.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
Jubiler
Novice
Posts:19
Joined:Tue Oct 20, 2015 4:09 am

Re: EasyCast HD Print problems

Postby Jubiler » Wed Aug 14, 2019 3:16 pm

Hello everyone! What can cause this problem of print.
Some prints coming ok but some they are like cut .
After printing I have in tank some uncured big pieces of resins.
Attachments
20190814_094224.jpg
emild
Novice
Posts:35
Joined:Wed Oct 24, 2018 9:55 pm

Re: EasyCast HD Print problems

Postby emild » Sat Nov 23, 2019 10:47 pm

I have a question and is not the problem with the bulb is new projector..100 hours used. anyone can help?

print with 25nm x 30nm

i spoted the marks on the pictures. looks like mess

how can i have clean prints ?

is maybe contrast and brightness on the nvidia settings ??
Attachments
Inked20191124_001913_LI.jpg
20191124_001918.jpg
20191124_001913.jpg
Kokos
Novice
Posts:30
Joined:Sat Dec 29, 2018 10:38 am

Re: EasyCast HD Print problems

Postby Kokos » Mon Nov 25, 2019 6:05 pm

Filter the resin before and after use. Also try maybe a slightly lower exposure time for the base layers. They appear to have some bleeding.
Check your model if it is 100% watertight. And look in the slicer if you see weird spots on the places that have the resin dirt.

I just looked again. Maybe it is dirty alcohol or whatever you use to clean the models. Or not cleaning them well enough. Then the dirt can stick to the model and when post-curing it will bake to the model. I have had that on some occasions.
emild
Novice
Posts:35
Joined:Wed Oct 24, 2018 9:55 pm

Re: EasyCast HD Print problems

Postby emild » Tue Nov 26, 2019 8:04 pm

thanks.

Who is online

Users browsing this forum: No registered users and 10 guests