Reins pro
-
- Novice
- Posts:33
- Joined:Fri Dec 11, 2015 5:03 am
Hey all which setting do we use for the wax pro resin. I can't seem to get it to go.
Re: Reins pro
are you talking about the Soluswax Pro resin?
Make sure your running version 2.3.4 or newer of solus contour.
It should be listed in the Resin Profile
Make sure your running version 2.3.4 or newer of solus contour.
It should be listed in the Resin Profile
-
- Novice
- Posts:33
- Joined:Fri Dec 11, 2015 5:03 am
Re: Reins pro
yes the soluswax pro, but its not listed under that name of pro, I used the settings they had but its not printing. I went back to green and its printing, soo. my other settings work. maybe its a bad batch. this is not what I expected to see even if it is a small sample. I did download the update, so that's not the problem. I'm just frustrated that its always touch and go.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Reins pro
If it’s not listed under “SolusWax pro” then you’re not using the correct profile.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
-
- Novice
- Posts:33
- Joined:Fri Dec 11, 2015 5:03 am
Re: Reins pro
question, on some of the new resins where you can adjust the light intensity, the first layer is bright white light, and then after that its the uv blue light. is that normal, and if it is, is there a setting just to make all the layers uv including the first layer.
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: Reins pro
you must not have the latest profiles. It is listed as Solus Wax Pro in the pull down menu. make sure you have Contour set for Beta for it to update.
Who is online
Users browsing this forum: No registered users and 12 guests