we're currently running win7 for prints... considering upgrading to win8 or 10, but i was wondering if there is any info on Creation Workshop compatibility with which operating systems (including 64 bit)
or any other compatibility issues that may exist with hardware.
Creation Workshop Compatibility
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Creation Workshop Compatibility
I strongly suggest Windows 8. Windows 10 is still too new and can be buggy.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Creation Workshop Compatibility
hi, i have a PC win 8 with 4gb ram, nvidia gts220 but when i slice done. I go to slice preview, CW seem to crash, i cant preview slice, and can not print. what is problem?
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: Creation Workshop Compatibility
do you have the display set correctly in CW? Are you using a HDMI cable?
go back through the Manual again to make sure you have everything set correctly. Make sure you are selecting the correct display and at the correct resolution.
go back through the Manual again to make sure you have everything set correctly. Make sure you are selecting the correct display and at the correct resolution.
Re: Creation Workshop Compatibility
Go to menu->preferences and check your foreground is set to white.
- Attachments
-
- white.png (24.41KiB)Viewed 16831 times
Re: Creation Workshop Compatibility
Also, check your administration privileges:
http://www.buildyourownsla.com/forum/viewtopic.php?t=4749
But this would likely cause it to not run, instead of crashing. Was there a recent graphics driver update?
http://www.buildyourownsla.com/forum/viewtopic.php?t=4749
But this would likely cause it to not run, instead of crashing. Was there a recent graphics driver update?
-
- Novice
- Posts:13
- Joined:Fri Jun 03, 2016 8:19 am
Re: Creation Workshop Compatibility
hiya just bought machine and trying to set it up.... on windows 10. on a microsoft surface book. been very tricky so far with menus missing so had to install drivers to make them appear and go into registry to alter amounts to get the options to appear also.
done all that now and done the creation workshop but says the printer has stopped working so does nt even open the software ? anyone any ideas? I have nt even got it to do anything yet....
should the software run even without being connected to the machine?
thanks,
done all that now and done the creation workshop but says the printer has stopped working so does nt even open the software ? anyone any ideas? I have nt even got it to do anything yet....
should the software run even without being connected to the machine?
thanks,
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: Creation Workshop Compatibility
Are you just wanting to slice with CW? Should be able to run CW. Or run the projector and printer with a surface? Which surface do you have. You will need at least 8 gigs of memory. Does surface have HDMI connections? Check to see if the ports are set to never shut down. (control panel)
Re: Creation Workshop Compatibility
Have you extracted all the files or are you just downloading the .exe file? It needs all the .dll files and other files to open.
-
- Novice
- Posts:13
- Joined:Fri Jun 03, 2016 8:19 am
Re: Creation Workshop Compatibility
no just the exe one.
thats now open it big... no a very big thank you,
thats now open it big... no a very big thank you,
Who is online
Users browsing this forum: No registered users and 1 guest