considering all the help this forum has given me, i wanted to make my small contribution to the community because when i needed this info it wasnt yet available and i needed to spend a bit of time figuring this out.
for the red MJ SF resin i find that it works well with at exposure time of 2800 and bottom exposure @ 12000, slice thickness of .030 and with adding an additional .5 percent red pigment and AA set to 4.
Its a very cheap resin but the prints look fantastic ..my tests wernt the most detailed prints but the surface quality is amazing...maybe tonight i will print one of those calibration tests to determine what if any fine detail limitations this resin has because its rated to .030 and not any lower.
next will be the white G + ..im told white resins can be more challenging but i hope im able to find success because at least for my proto needs, a good white resin , that cures very hard and is capable of very fine detail is exactly what my needs call for.
Makerjuice SF prototyping resin
-
- Solus Expert
- Posts:136
- Joined:Thu Feb 25, 2016 4:09 pm
Re: Makerjuice SF prototyping resin
Hi manakawari,
I bought Red MakerJuice SF + Red pigment and I want to do my first print with it. This will be my first print with the solus.
I will use your setting. Thank you gor sharing. However I don't really understand how to make the pigment addition.
0.5% means 5ml for 1litter? Because this link confuses me ( https://makerjuice.com/pages/pigment-concentrations ).
What is AA? Iam newbie
Do you put the UV filter back into the projector bulb housing, as recommended by mongerdesigns? ( viewtopic.php?f=8&t=251&p=1850&hilit=makerjuice#p1850 )
Thank you for your time,
Jacques
I bought Red MakerJuice SF + Red pigment and I want to do my first print with it. This will be my first print with the solus.
I will use your setting. Thank you gor sharing. However I don't really understand how to make the pigment addition.
0.5% means 5ml for 1litter? Because this link confuses me ( https://makerjuice.com/pages/pigment-concentrations ).
What is AA? Iam newbie
Do you put the UV filter back into the projector bulb housing, as recommended by mongerdesigns? ( viewtopic.php?f=8&t=251&p=1850&hilit=makerjuice#p1850 )
Thank you for your time,
Jacques
Re: Makerjuice SF prototyping resin
@ Manakawari:
Do you add the pigment for improving the quality of the printing or just for aesthetic reasons?
Do you add the pigment for improving the quality of the printing or just for aesthetic reasons?
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: Makerjuice SF prototyping resin
For quality of the print.
Who is online
Users browsing this forum: No registered users and 9 guests