Hi
I have seen that the lenses are added to the h1186 vivitek projector ... are they ordered separately?
And why is not it good to use zoom?
vivitek 1186
-
- Solus Expert
- Posts:197
- Joined:Wed Feb 17, 2016 10:36 pm
Re: vivitek 1186
Without the lenses, you can't zoom in and focus that close. The lenses are included with the printer purchase.
Re: vivitek 1186
Thanks for the answer and where can I buy it separately?
-
- Solus Expert
- Posts:197
- Joined:Wed Feb 17, 2016 10:36 pm
Re: vivitek 1186
To get the right one, I think you should contact INFO@JUNCTION3D.COM if you are in the US or whoever you get the printer from.
Re: vivitek 1186
Thank you already I found it .... they are macro lenses 1 + 2 + 4 + 10 + there are many brands ..... it is important to buy exactly the same size as the projector.
-
- Solus Expert
- Posts:197
- Joined:Wed Feb 17, 2016 10:36 pm
Re: vivitek 1186
You can buy it yourself of course, but you will need to make the adapter to attach it to the projector as well. I will just get it from the Solus dealer to save time and trouble. Not sure why you wanna buy it when it already comes with the printer. Sound like you are not a Solus user.
kostyo wrote:Thank you already I found it .... they are macro lenses 1 + 2 + 4 + 10 + there are many brands ..... it is important to buy exactly the same size as the projector.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: vivitek 1186
That's what I was gonna say too.
If you buy a Solus the lenses will be included.
If you buy a Solus the lenses will be included.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: vivitek 1186
I'm not a solus user .... I bought one cheap LCD printer but I'm very dissatisfied
I want to rebuild it to the topdown DLP printer
But if I do not build the topdown printer correctly....buy only a solus without a projector
I want to rebuild it to the topdown DLP printer
But if I do not build the topdown printer correctly....buy only a solus without a projector
-
- Solus Expert
- Posts:197
- Joined:Wed Feb 17, 2016 10:36 pm
Re: vivitek 1186
Just get a Solus. It will save you a ton of headache. You don't have to get the projector with the Solus to get the lenses. The lenses are included with the Solus alone.
kostyo wrote:I'm not a solus user .... I bought one cheap LCD printer but I'm very dissatisfied
I want to rebuild it to the topdown DLP printer
But if I do not build the topdown printer correctly....buy only a solus without a projector
Re: vivitek 1186
I want to understand why there solus these macro lenses installs ....
I read one article ....http://robotsinthesun.org/dlp-printer-b ... tribution/
According to this article, it is better to put the projector a little further from the printer to reduce the angle of light ... or I think bad?
Is not it better to put the projector up?....Without lenses?
I read one article ....http://robotsinthesun.org/dlp-printer-b ... tribution/
According to this article, it is better to put the projector a little further from the printer to reduce the angle of light ... or I think bad?
Is not it better to put the projector up?....Without lenses?
Who is online
Users browsing this forum: No registered users and 5 guests