Trouble casting resin model? read this....
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Depends on metal your casting and how heavy a model. I use 1000 degrees F. I use vacuum cast, so I figure I'll loose several degrees before I pour metal. Most use somewhere between 800 to 1000 for casting temp.
Re: Trouble casting resin model? read this....
Jewelermdt wrote:Depends on metal your casting and how heavy a model. I use 1000 degrees F. I use vacuum cast, so I figure I'll loose several degrees before I pour metal. Most use somewhere between 800 to 1000 for casting temp.
thanks for you reply
can you give me recommend on casting machine. my budget 5k
too many brand I don't know which one fit for me and never cast before so I don't know.
Re: Trouble casting resin model? read this....
I use the lucas dental centrifugal casting machine. $550.
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: Trouble casting resin model? read this....
I use something like this for casting and investing. http://www.gesswein.com/p-10338-t15-del ... chine.aspx
This is a nice burn out oven. http://www.gesswein.com/p-7821-ney-3-55 ... rnace.aspx
I use this http://www.gesswein.com/p-1612-ney-fiber-furnace.aspx with this so I don't have to babysit. http://www.gesswein.com/p-1620-kilnminder-4e.aspx. A little work in wiring the furnace to work with it. You have to disable everything but the heating coils. So it's best to purchase an ALL IN ONE unit.
You will have to send out platinum. I do very little and send my to Tech-Fourm
This is a nice burn out oven. http://www.gesswein.com/p-7821-ney-3-55 ... rnace.aspx
I use this http://www.gesswein.com/p-1612-ney-fiber-furnace.aspx with this so I don't have to babysit. http://www.gesswein.com/p-1620-kilnminder-4e.aspx. A little work in wiring the furnace to work with it. You have to disable everything but the heating coils. So it's best to purchase an ALL IN ONE unit.
You will have to send out platinum. I do very little and send my to Tech-Fourm
Re: Trouble casting resin model? read this....
thank you guys. thank you for your recommend. I will order it and practice for while and will be bother you guys in next time.
have a good day .
have a good day .
Who is online
Users browsing this forum: No registered users and 3 guests