Solus Wax Resin

Discuss 3d printing resins
printcast
Solus Expert
Posts:157
Joined:Fri Oct 09, 2015 2:38 pm
Re: Solus Wax Resin

Postby printcast » Thu May 17, 2018 1:24 am

Let us know. I hope you are planning to take pics.
User avatar
Jewelermdt
Solus Master
Posts:809
Joined:Sun Jul 19, 2015 10:38 pm
Location:N.W. Florida
Contact:

Re: Solus Wax Resin

Postby Jewelermdt » Thu May 17, 2018 3:54 am

I have so busy and backed up with casting I haven't had time to take pictures. I do my casting at home. I set up my flasks around 7pm. In oven at 11 with 1 hour delay. Cast at 7am. Shower and off to work. But so far the Solus Wax has been casting great.
this is a finished ring. Got lots of fill in on shank with the Blue Solus Cast. Not so with SolusWax.
button2.jpg
User avatar
ironfonzy
Novice
Posts:39
Joined:Thu Jan 05, 2017 9:16 pm
Location:Bordeaux France

Re: Solus Wax Resin

Postby ironfonzy » Mon Jun 04, 2018 8:55 pm

Some news of the soluswax resin ???? ;)
User avatar
Jewelermdt
Solus Master
Posts:809
Joined:Sun Jul 19, 2015 10:38 pm
Location:N.W. Florida
Contact:

Re: Solus Wax Resin

Postby Jewelermdt » Tue Jun 05, 2018 2:15 am

Might have to wait till the JCK Vegas show is over.

I've been getting great prints with it. Casting has been up and down. Some voids and such but been able to fix using my laser.
lklutts
Solus Expert
Posts:124
Joined:Thu Jul 16, 2015 8:48 pm

Re: Solus Wax Resin

Postby lklutts » Tue Jun 05, 2018 3:45 am

I have been having great success with the solus wax. Cure 30 minutes 5 hour rest after investing. Straight up full power to 1450 for 2.5 hours,then down to 850 to cast. No porosity,just fantastic castings.
User avatar
M-Williams
Solus Master
Posts:393
Joined:Sun Nov 01, 2015 4:45 pm

Re: Solus Wax Resin

Postby M-Williams » Tue Jun 05, 2018 7:40 pm

lklutts wrote:I have been having great success with the solus wax. Cure 30 minutes 5 hour rest after investing. Straight up full power to 1450 for 2.5 hours,then down to 850 to cast. No porosity,just fantastic castings.



That sounds promising. How is the print Quality?
lklutts
Solus Expert
Posts:124
Joined:Thu Jul 16, 2015 8:48 pm

Re: Solus Wax Resin

Postby lklutts » Tue Jun 05, 2018 9:26 pm

The blue on the right is the latest that I was testing. On the left is the first one. Resolution is much better on the blue at 42. Prints great, casts great. another pic of a filigree in white gold. Came out great.
Attachments
20180605_135152.jpg
navy 1.jpg
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Solus Wax Resin

Postby mongerdesigns » Tue Jun 05, 2018 10:57 pm

Excellent work Len. That casting looks legit!
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
rsaldivar
Solus Master
Posts:327
Joined:Tue Jun 30, 2015 8:51 pm

Re: Solus Wax Resin

Postby rsaldivar » Tue Jun 05, 2018 11:01 pm

im curious to see the casting on the ring with fonts , nice work Len
User avatar
exedebee
Solus Expert
Posts:128
Joined:Fri Feb 12, 2016 3:39 am

Re: Solus Wax Resin

Postby exedebee » Wed Jun 06, 2018 1:28 am

:o :o very nice

Who is online

Users browsing this forum: No registered users and 10 guests