SolusArtGrey failure

Discuss 3d printing resins
User avatar
Ben @ Mastercrafted
Novice
Posts: 14
Joined: Fri May 18, 2018 9:21 am

SolusArtGrey failure

Postby Ben @ Mastercrafted » Mon Jan 14, 2019 3:31 pm

My first print with SolusArtGrey, fresh FEP, Contour 2.1.17 Beta on default settings:
ImageA
ImageB

The supports are still connected to the build plate, but most of the print remains on the FEP blocking light to prevent further progress. Surprisingly difficult to remove from the FEP using the silicone spatula.
I've been having similar problems with the SolusProto lately, but put it down to being at the end of the bottle. Any suggestions?
User avatar
Ben @ Mastercrafted
Novice
Posts: 14
Joined: Fri May 18, 2018 9:21 am

Re: SolusArtGrey failure

Postby Ben @ Mastercrafted » Fri Feb 08, 2019 10:18 am

To follow up, this failure was caused a corrupt profile, fixed by:
• Edit > Open Profiles Folder
• Delete offending profile
• Select same profile in Contour (it will re-download?)

Hopefully, this will help others in the future.

Who is online

Users browsing this forum: No registered users and 3 guests