So what is up with SolusWax Pro?

Discuss 3d printing resins
User avatar
jeweltool
Novice
Posts: 58
Joined: Wed Jul 01, 2015 8:57 pm

Re: So what is up with SolusWax Pro?

Postby jeweltool » Tue Nov 26, 2019 6:38 pm

Yes.

Emil has done a great job matching this resin to the Solus.
emild
Novice
Posts: 35
Joined: Wed Oct 24, 2018 9:55 pm

Re: So what is up with SolusWax Pro?

Postby emild » Tue Nov 26, 2019 8:07 pm

what is the difference between this and EasyHD???
wawatobi
Novice
Posts: 71
Joined: Tue Nov 24, 2015 9:56 am

Re: So what is up with SolusWax Pro?

Postby wawatobi » Sun Jan 12, 2020 10:57 am

Anybody know how to download the original settings for easycast. I changed them with all the printing problems i was having and can't find the original settings.
User avatar
mongerdesigns
Solus Guru
Posts: 1926
Joined: Sat Apr 25, 2015 5:16 pm
Location: Los Angeles
Contact:

Re: So what is up with SolusWax Pro?

Postby mongerdesigns » Sun Jan 12, 2020 5:10 pm

Press the reset button in the resin profile window
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
smokepl
Novice
Posts: 16
Joined: Tue Apr 17, 2018 6:01 pm

Re: So what is up with SolusWax Pro?

Postby smokepl » Tue Feb 04, 2020 5:04 pm

Can anyone who had experience with new SolusWax Pro and EasyCast HD share their thoughts between does two? How about platinum casting on SolusWax Pro? regular investment works just fine? Thanks!
rkundla
Solus Expert
Posts: 288
Joined: Sat Jan 09, 2016 6:01 am

Re: So what is up with SolusWax Pro?

Postby rkundla » Sun May 03, 2020 12:22 am

Does SolusWax Pro have the same restrictions for supports, etc. as mentioned in the "SolusWax Tips and Tricks" pinned thread?

So far I've had good luck with it, using 0.4 standard support tips to anchor my prints to the plate. I did try using the sphere tips with a thicker (0.6) attachment point but had mixed results of prints breaking loose from the supports.

Any other good tips or tricks for the new resin?
User avatar
mongerdesigns
Solus Guru
Posts: 1926
Joined: Sat Apr 25, 2015 5:16 pm
Location: Los Angeles
Contact:

Re: So what is up with SolusWax Pro?

Postby mongerdesigns » Sun May 03, 2020 4:22 am

Try not using sphere support for anchoring down the models. Thick support tips will be stronger so stay in the 0.4-0.6 range whenever possible.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/

Who is online

Users browsing this forum: No registered users and 2 guests