Introducing the SolusProto Resin!

Discuss 3d printing resins
emild
Novice
Posts: 25
Joined: Wed Oct 24, 2018 9:55 pm

Re: Introducing the SolusProto Resin!

Postby emild » Thu Jan 17, 2019 7:39 pm

Hi there,
Anyone can share the curing time neeed for this resin?

Do it need curing before making molds from rubber? Castaldo rubber.

Waiting some answers,
Thnak you,
User avatar
Ben @ Mastercrafted
Novice
Posts: 14
Joined: Fri May 18, 2018 9:21 am

Re: Introducing the SolusProto Resin!

Postby Ben @ Mastercrafted » Fri Feb 08, 2019 10:22 am

I cure for a couple of hours in my UV box, bought from Micron. Probably overkill. I then spray the parts with a wax barrier (MacWax for me).
I don't know if Castaldo is platinum-based, or tin-based (addition-cure, or condensation-cure). The latter will be less prone to cure-inhibition.
rsaldivar
Solus Expert
Posts: 259
Joined: Tue Jun 30, 2015 8:51 pm

Re: Introducing the SolusProto Resin!

Postby rsaldivar » Mon Feb 11, 2019 7:39 pm

cure it 5 min. in cure box , then boil them in water ,

start from room temp to boil , leave boiling for 10 min. and then leave in water till water is warm enough to put your hands in , no spray , just spur up and mold

Who is online

Users browsing this forum: No registered users and 3 guests