Kevin's work

Show off your prints.
studiojoia
Novice
Posts: 96
Joined: Mon Mar 28, 2016 8:05 am

Re: Kevin's work

Postby studiojoia » Wed Nov 08, 2017 4:15 pm

Awesome jobs Kevin. I love how you show your workflow.
St0rmykev
Novice
Posts: 30
Joined: Wed Jan 27, 2016 7:42 pm

Re: Kevin's work

Postby St0rmykev » Tue May 08, 2018 5:31 pm

Been kinda boring on the custom side lately. ( By that I mean, lots of three stones, halo's etc. LOL ) This one was one of the uncommon requests that came through recently that just got finished up. Combination of some CAD/Zbrush Sculpting. Turned out great and customer loved it. It was quite the "hoot" to make. ;-) Sadly the customer didn't order two, or I would've had a better pun for ya. :-)
Attachments
IMG_20180409_140536463.jpg
IMG_20180503_153421629.jpg
Owl pendent.jpg
St0rmykev
Novice
Posts: 30
Joined: Wed Jan 27, 2016 7:42 pm

Re: Kevin's work

Postby St0rmykev » Wed Oct 03, 2018 2:02 pm

Got a couple new ones to share. This client wanted a humming bird brooch made based on the sketch attached. Made all the basic shapes in Matrix then took it over into Zbrush and sculpted on it. A lot of fun to do. Sadly, we are on a time crunch with it so I didn't get the chance to snap a picture of the wax, but this was grown in Soluswax. It's still a work in progress so If I get the chance to, I'll snap a final finished photo of it to share.
Attachments
Bird Sketch.jpg
Before.jpg
After.jpg
Bird Cast 3.jpg
Brid cast 1.jpg
St0rmykev
Novice
Posts: 30
Joined: Wed Jan 27, 2016 7:42 pm

Re: Kevin's work

Postby St0rmykev » Wed Oct 03, 2018 2:09 pm

Here's another cool WIP that's going on. Client wanted a pendent similar to the sketch. Similar process to the hummingbird. Basic shapes made in Matrix and then bring them over to Zbrush for a little extra work. This was grown on the Solus using Soluswax. Goes into casting today. I'll try to post an update after casting.
Attachments
Pendent idea.jpg
Pendent idea.jpg (36.63 KiB) Viewed 1445 times
Zbrush feather project.jpg
Confidential project.jpg
Feather wax 1.jpg
Feather wax 2.jpg
User avatar
mongerdesigns
Solus Guru
Posts: 1854
Joined: Sat Apr 25, 2015 5:16 pm
Location: Los Angeles
Contact:

Re: Kevin's work

Postby mongerdesigns » Wed Oct 03, 2018 3:01 pm

That’s incredible work, Kevin! Keep them coming!
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
Eoin Rogan
Novice
Posts: 23
Joined: Thu May 05, 2016 11:23 am

Re: Kevin's work

Postby Eoin Rogan » Thu Oct 04, 2018 5:19 pm

Lovely designs and prints. Are they 40 micron step prints?
St0rmykev
Novice
Posts: 30
Joined: Wed Jan 27, 2016 7:42 pm

Re: Kevin's work

Postby St0rmykev » Thu Oct 04, 2018 8:23 pm

Eoin Rogan wrote:Lovely designs and prints. Are they 40 micron step prints?



Both of the projects were grown at 30 microns. The Humming bird project almost was too big for the build platform at that setting, but it ended up working out fine.

Below is the casting for the last piece I shared. Came out awesome!
Attachments
20181004_150208.jpg
User avatar
M-Williams
Solus Master
Posts: 382
Joined: Sun Nov 01, 2015 4:45 pm

Re: Kevin's work

Postby M-Williams » Sat Oct 06, 2018 2:44 pm

Solus at its Best. Wonderful work By the Way.
St0rmykev
Novice
Posts: 30
Joined: Wed Jan 27, 2016 7:42 pm

Re: Kevin's work

Postby St0rmykev » Mon Dec 31, 2018 4:23 pm

Another fun one to close out the year with. Client had a 10ct. Amethyst trillion that she wanted to make into a pendent like the sketch. She already had the necklace with the dragon so I sadly didn't get to make those. :cry: Unfortunately this is the only view I was given to work with which was a challenge since I didn't really know what I was going to do underneath the artwork from the top. Couple of routes I could have went in making this, but ultimately I decided doing most of the work for this one in Zbrush. Thought going that route would be less of a pain in the you know what than making this all in matrix with multi rail sweep and all kinds of stuff like that. Before the Zbrush work I decided to lay out some simple t-spines tubes in matrix and establish the basic shape. This also allowed me to evaluate and determine what I could flow off of the artwork from the top to form a basket for the stone. From there, this was transformed in Zbrush to what you see here.
Attachments
IMG_20181214_111433515_HDR.jpg
Basic model.jpg
Pendent finished, pic 1.jpg
St0rmykev
Novice
Posts: 30
Joined: Wed Jan 27, 2016 7:42 pm

Re: Kevin's work

Postby St0rmykev » Mon Dec 31, 2018 4:34 pm

Rest of the pictures and the 3d print. Model grown on the Solus with Solus wax. Goes into casting this week. *Fingers Crossed*
Attachments
Pendent Finished, pic 2.jpg
Pendent Finished, pic 2.jpg (29.02 KiB) Viewed 698 times
Pendent finished, pic 3.jpg
Pendent Finished, pic 4.jpg
Pendent Finished, pic 4.jpg (29.1 KiB) Viewed 698 times
IMG_20181231_112818.jpg

Who is online

Users browsing this forum: No registered users and 2 guests