My first yellow resin cast

Discuss casting techniques
joeyalbano
Novice
Posts: 47
Joined: Mon Apr 25, 2016 3:49 pm

My first yellow resin cast

Postby joeyalbano » Fri Feb 03, 2017 5:56 pm

Had to build it at 41xy resolution cause it wouldn't fit on the 25xy platform.
Attachments
Capture 1.JPG
Capture 1.JPG (16.46 KiB) Viewed 3163 times
User avatar
Archerm
Solus Master
Posts: 579
Joined: Mon Oct 26, 2015 1:57 pm
Location: North Carolina

Re: My first yellow resin cast

Postby Archerm » Fri Feb 03, 2017 10:28 pm

Looks nice and clean!!
printcast
Solus Expert
Posts: 156
Joined: Fri Oct 09, 2015 2:38 pm

Re: My first yellow resin cast

Postby printcast » Sat Feb 04, 2017 12:23 pm

I've been thinking about moving to yellow from green. Yellow is suppose to be the cleanest burn out. Have you done cast with both yellow and green? How do they compare? Did you use the stock Solus yellow settings? (now that I think about it, I'm not sure if there is a stock Solus setting for yellow, lol)
User avatar
mongerdesigns
Solus Guru
Posts: 1864
Joined: Sat Apr 25, 2015 5:16 pm
Location: Los Angeles
Contact:

Re: My first yellow resin cast

Postby mongerdesigns » Sat Feb 04, 2017 4:27 pm

There is a setting for the yellow in Contour.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
joeyalbano
Novice
Posts: 47
Joined: Mon Apr 25, 2016 3:49 pm

Re: My first yellow resin cast

Postby joeyalbano » Mon Feb 06, 2017 5:01 pm

I only worked with the yellow resin so can't really compare. I had to run this in 42xy cause it wouldn't fit on the 25xy platform.
robin
Solus Expert
Posts: 133
Joined: Wed Sep 23, 2015 3:03 pm

Re: My first yellow resin cast

Postby robin » Fri Feb 10, 2017 2:41 pm

Here's some of my B9 Yellow resin castings in 14Y..
I don't know how to embed an image from dropbox so just click it to view. figured it out!

2017-02-10 09.11.26.jpg
User avatar
MobiusJewelryDesign
Novice
Posts: 55
Joined: Sat Sep 19, 2015 12:30 pm
Location: Atlanta, GA
Contact:

Re: My first yellow resin cast

Postby MobiusJewelryDesign » Thu Feb 23, 2017 10:48 pm

That is a clean cast! What's your procedure? Setup? I use yellow too and I have used green. The green is nice to look at but I seem to get better results with the yellow. I appreciate you posting.
smokepl
Novice
Posts: 14
Joined: Tue Apr 17, 2018 6:01 pm

Re: My first yellow resin cast

Postby smokepl » Fri Mar 15, 2019 2:38 pm

Can I cure yellow in a microwave like I do with the green one? I been using emerald for a while and so far it is the best for casting using different casting companies, but I would like to try yellow. Should I be fine using same technique? clean in denatured alcohol, UV dry cure, microwave and blow dry. Thanks

Who is online

Users browsing this forum: No registered users and 1 guest