Search found 14 matches

by Alexpolo
Fri Aug 03, 2018 8:53 am
Forum: Resins
Topic: Solus Wax Resin
Replies: 189
Views: 134988

Re: Solus Wax Resin

Still no go - I freshly imported STL and hit lattice but nothing comes up.

Any clues to why the feature is not visible.

Capture.JPG
by Alexpolo
Wed Aug 01, 2018 10:05 pm
Forum: Resins
Topic: Solus Wax Resin
Replies: 189
Views: 134988

Re: Solus Wax Resin

I cant get Lattice to work - I have some trouble with prints adhering to table. Import models - goto manual supports and on SOLUSWAX resin profile.

Any advice

thanks

Capture.JPG
by Alexpolo
Thu Feb 08, 2018 10:25 pm
Forum: Tips and Tutorials
Topic: REINSTALL WINDOWS
Replies: 3
Views: 8447

Re: REINSTALL WINDOWS

Hi Mark, Havent received the new document - I found my install instructions but they where for win8 and CW. I have installed ARDUINO 1.68 seems current is 1.85 I have done the RGB full install - in contour I can connect to Solus but wont run home cycle. Do I need to still install CW? havent used sin...
by Alexpolo
Thu Feb 08, 2018 8:47 am
Forum: Tips and Tutorials
Topic: REINSTALL WINDOWS
Replies: 3
Views: 8447

REINSTALL WINDOWS

HI All, After running the solus for nearly 2 years swapped to new control computer old one dying looking for current setup instructions running Contour with Vivitech and NVDIA graphics card. Found this link https://reify3d.wistia.com/projects/ztww6a0tqj Missing all the RGB setup and other install in...
by Alexpolo
Sun Jul 23, 2017 8:26 am
Forum: Resins
Topic: Introducing the SolusCast resin
Replies: 99
Views: 158562

Re: Introducing the SolusCast resin

Any cast samples from Heavy Large Signet Rings - 5-6 grams of resin in 1 ring would be a good sample.
by Alexpolo
Tue Dec 20, 2016 6:31 am
Forum: Hardware
Topic: [SOLVED] Z - Zero Motor Stop Error
Replies: 3
Views: 5308

[SOLVED] Z - Zero Motor Stop Error

Hi All, Solus has been printing solid AOK for some time now getting perfect results. Last prints produced build table returning back to it usual finish location. Tried to get some prints going today and Solus goes down to Zero Z but doesnt stop - hits the zero location and keeps wanting to go down. ...
by Alexpolo
Sun Oct 09, 2016 12:50 am
Forum: Software
Topic: Turn off projector when done
Replies: 17
Views: 17382

Re: Turn off projector when done

All AOK - had to select manual DRIVER from from selected folder.

Projector shutting down well now.

thanks
by Alexpolo
Fri Oct 07, 2016 5:57 am
Forum: Software
Topic: Turn off projector when done
Replies: 17
Views: 17382

Re: Turn off projector when done

I am having same problem running Contour have downloaded listed driver when I try update I get the most updated driver is already installed. Please advise on how I can change so that projector shuts down.

thanks
by Alexpolo
Sat Aug 27, 2016 9:37 pm
Forum: General
Topic: Heavy Section Printing Stick to Film
Replies: 11
Views: 10454

Re: Heavy Section Printing Stick to Film

Hi Guys, The discolour in the resin was I am phasing out cherry and as I wasted emerald in trials I threw in some cherry for trials to get rid of it but would say 80/90% emerald. With the silicone film I have a couple of grades that I am playing with - so far looks promising the first grade I am tri...
by Alexpolo
Tue Aug 23, 2016 8:58 am
Forum: General
Topic: Heavy Section Printing Stick to Film
Replies: 11
Views: 10454

Re: Heavy Section Printing Stick to Film

After more than 10 attempts I playing with exposure setting up and down finally gave up using the teflon film switched to other film which I will discuss in a new thread. Perfect prints with default settings out of Contour. The Bear was printed solid not hollowed and the 2 heavy wall rings worked so...