It's solid. About the size of your thumbnail.

Hey guys, I'm printing with Proto at 25xy and 10z. I'm building straight onto the build plate. I've noticed some very heavy layering lines in the model. They're occurring at the thickest section of the model (the mane) but are disappearing at the smaller cross-section (face). This would indicate to ...

The projector is past it's warranty. We've had it for now for about a year and a half. Do you know if this issue will dramatically effect the result of an attempted print? We have not had a successful print for a good while now, which is why I opted to replace the lightbulb, thinking that this was t...

I'm doubling up here, but I saw another thread on this issue. Our glass filters are also broken on our Infocus projector. I only noticed this when I was swapping out the lightbulb. I was told by the distributor here that he's also experienced this on one of his inFocus projectors, but he isn't notic...

We also noticed this on our inFocus projector when swapping out the lightbulb. We havent had any luck printing since, even with the new bulb. Can you please advise what to do? Cheers.

Hey, anyone noticing some white slime with B9's Emerald?
I'm sometimes getting it sticking to my models, and it's really been collecting in my alcohol rinse tub.
Normal? or weird?

Ta,

Aaron

I've tried printing in Airplane mode (wifi off), same thing was happening.

I 're-installed' CW this morning and had two successful plates, so hopefully that's it.

Hey guys, Just wondering if anyone has had anything like this - I'll be into a print when the projector stops projecting and the build plate stops moving up and down. In the CW window at the top right, the elapsed time keeps ticking on, but the percentage stops counting. The other problem I have is ...

Thanks mate, appreciate the help. I ran a print off, seems to have printed nicely but that curvature just worries me...

Thanks Emil, I did raise the back of the projector to centre the grid onto the quartz plate. With the projector and printer dead flat, the image isn't centred on the build plate, but it does look like the curvature has straightened out a bit. The projector feet are retracted all the way in, and the ...