Selling my Solus on Ebay

Machine works perfectly but projector might need replacing depending on the resin you intend to use.

link to ebay, shipping to the UK for free :

https://www.ebay.co.uk/itm/Solus-3d-pri ... 3710607798

Perfect, thanks for the info.

Hi It seems that the 4 supported projector models, the infocus IN8606HD, Vivitek H1186HD, Vivitek H1185HD and the Optoma hd37 are all out of production, which means that for some of them finding replacements and lamps will be much harder (couldn't find any for the vivitek..). Are there any other mod...

Good thing i read this before it destroyed my vat. I started seeing lines on the acrylic as well as the same sticky stuff after just one week usng the protosolus and not leaving resin in it overnight.

Yes it has holes at top and bottom. Changing the film solved the problem, it came out nice and clean..i am terrible at taking care of the films..
The buffer time increase is something i would really like to try in similar scenarios. Thanks for your help!

Hi I am experiencing lines and usually one deep cut in my prints. Using proto solus with default settings, I have tried slicing at 25 30 and also 20 (keeping he same settings as 25), the lines are visible in most prints, big an small, the cuts only in bigger ones (always hollowed) My guess is that i...

Marcin, what resin do you commonly use for your miniature prints?

Ok it must be holes then, i see dents as well. The pressure of the resin itself on the film has been enough in my case..time to throw it away.

Yes i changed the film and thought it was screwed in pretty tight. As far as the rubber gasket, i see more of a sealing silicone layer around the bottom of the tank than something like this http://www.customrubbercorp.com/getmedia/f4505ff0-27a8-49b8-a110-bc835f0ebe4d/101000-rectangular-seal?width=40...

All right i just found something interesting: After my last test, when again i found residue on the quartz, i left the resin inside the vat and stored it in a container in such a way that the film does not touch anything, the vat resting on 8 side supports preventing any contact of the film with the...