Calibration help

[Mikkopee]

How do I calibrate this?

All cubes are 8x10mm

Y-axis I can fix, but X -axis is problem.. its fine in the middle but both sides are too small. How do I fix this?

Projected grid is fine and straight lines.
And measuments are 80x45mm like it should be.

[Messerbr]

Have you fully calibrated the printer with a 10mm cube and used the "Scale Adjustment" feature to correct any inaccuracies?

[Mikkopee]

Have you fully calibrated the printer with a 10mm cube and used the "Scale Adjustment" feature to correct any inaccuracies?

Yes, but when sidecubes are OK, middle cubes are too big and vice versa.
And Y-axis is no problem and scale adjustment works fine but X-axis is problem since middle its fine but sides are too small and I dont know how to fix those.

[Messerbr]

hmm, probably has something to do with the projection and lens curvature. might try stretching the projection grid out a little at those corners by 0.2ish mm to compensate for it?

[Matej123]

any one can explain me how to do the platform calibration?step by step please

[sochin]

any one can explain me how to do the platform calibration?step by step please

I have never done it but the video in this thread and the replies might help you.

viewtopic.php?t=1013

cheers,
Sochin